Rotary Table Specifications - MMK

Home

Products & Services

Specifications

Information Request

MD Type	MDH Type	MDB Type	MDU Type
MDO Type	MDVi Type	MDAT Type	MDAT-ECT Type
MDE Type	MT Type	1 or 2 Axis Controller	Tail Stock Hydrolic Type
Tail Stock Manual Type	Chucking System	Power Chucks

MD Type Specifications

Click HERE to view MD diagrams.

ITEMS	MODEL			MD 322R(L)	MD 323R(L)	MD 400R(L)	MD 403R(L)	MD 500R(L)	MD 503R(L)	MED 630R(L)	MD 632R(L)	MD 800R	MD 1000R	MD 1200R
TABLE DIAMETER			mm	325	325	400	400	500	500	635	635	800	1000	1200
CENTER HEIGHT IN VERTICAL			mm	210	210	255	255	280	280	400	400	480	600	―
TABLE HEIGHT IN HORIZONTAL			mm	220	220	240	240	250	250	290	290	360	400	400
OVERALL HEIGHT IN VERTICAL			mm	425	425	514	514	549	549	782	782	890	1120	400
THRU HOLE DIAMETER			mm	115	115	170	170	170	170	254	254	254	315	320
WIDTH OF T-SLOT			mm	14	14	14	14	18	18	18	18	18	28	28
WIDTH OF GUIDE BLOCK			mm(h7)	18	18	18	18	18	18	22	22	22	28	―
MOTOR(FANUC※)				α6/2000	α12/2000	α12/2000	α22/2000	α12/2000	α22/2000	α22/2000	α22/2000	α22/2000	α30/2000	α30/1200
GEAR RATIO				1/120	1/60	1/180	1/60	1/180	1/60	1/360	1/120	1/360	1/360	1/360
MAX. R.P.M			r.p.m.	16.7	33.3	8.3	33.3	8.3	33.3	5.5	16.7	5.5	4.1	3.3
MIN. INDEXING UNIT			degree	0.001	0.001	0.001	0.001	0.001	0.001	0.001	0.001	0.001	0.001	0.001
INDEXING ACCURACY			sec	12(6)	12(6)	12(6)	12(6)	12(6)	12(6)	12(6)	12(6)	12(6)	12(6)	12(6)
REPEATABILITY			sec	±2(2)	±2(2)	±2(2)	±2(2)	±2(2)	±2(2)	±2(2)	±2(2)	±2(2)	±2(2)	±2(2)
CLAMPING FORCE			Ｎ-m	2303	2303	4675	4675	4675	4675	5635	5635	1686	8526	13720
CLAMPING FORCE			kg-m	235	235	477	477	477	477	575	575	172	870	1400
HYDRAULIC PRESSURE			ＭＰa	4.9	4.9	4.9	4.9	4.9	4.9	4.9	4.9	4.9	4.9	4.9
HYDRAULIC PRESSURE			kg/cm2	50	50	50	50	50	50	50	50	50	50	50
PERMISSIBLE LOAD		HORIZONTAL	kg	350	350	500	500	500	500	2500	2500	2500	6000	6000
PERMISSIBLE LOAD		VERTICAL	kg	150	150	350	350	350	350	800	800	800	1200	―
MAX MACHINING FORCE			Ｎ-m	1117	1117	1470	1470	1470	1470	3136	3136	3136	6370	9310
MAX MACHINING FORCE			kg-m	114	114	150	150	150	150	320	320	320	650	950
WEIGHT			kg	215	220	350	360	390	400	800	800	1200	3300	3500

MDH Type Specifications

Click HERE to view MDH diagrams.

ITEMS	MODEL					MDH152R		MDH232R(L)		MDH233R(L)		MDH322R(L)		MDH323R(L)
TABLE DIAMETER				mm		150		230		230		325		325
CENTER HEIGHT IN VERTICAL				mm		115		185		185		235		235
TABLE HEIGHT IN HORIZONTAL				mm		170		200		200		220		220
OVERALL HEIGHT IN VERTICAL				mm		265		310		310		411		411
THRU HOLE DIAMETER				mm		20		60		60		115		115
WIDTH OF T-SLOT				mm		12		12		12		14		14
WIDTH OF GUIDE BLOCK				mm(h7)		18		18		18		18		18
MOTOR(FANUC※)						α3/3000		α3/3000		α6/2000		α6/2000		α12/2000
GEAR RATIO						1/90		1/120		1/60		1/120		1/60
MAX. R.P.M				r.p.m.		22.2		16.7		33.3		16.7		33.3
MIN. INDEXING UNIT				degree		0.001		0.001		0.001		0.001		0.001
INDEXING ACCURACY				sec		60(10)		14(6)		14(6)		12(6)		12(6)
REPEATABILITY				sec		±3(3)		±2(2)		±2(2)		±2(2)		±2(2)
CLAMPING FORCE				Ｎ-m		196		284		284		2303		2303
				kg-m		20		29		29		235		235
HYDRAULIC PRESSURE				ＭＰa		4.9		4.9		4.9		4.9		4.9
				kg/cm2		50		50		50		50		50
PERMISSIBLE LOAD		HORIZONTAL	kg		80		200		200		350		350
		VERTICAL	kg		40		100		100		150		150
MAX MACHINING FORCE				Ｎ-m		343		490		735		1117		1117
				kg-m		35		50		75		114		114
WEIGHT				kg		65		110		110		190		195

MDB Type Specifications

Click HERE to view MDU diagrams.

ITEMS	MODEL		MDB182R(L)	MDB232R(L)	MDB233R(L)	MDB322R(L)	MDB323R(L)	MDB403R(L)
TABLE DIAMETER		mm	180	230	230	325	325	400
CENTER HEIGHT IN VERTICAL		mm	130	185	185	235	235	260
OVERALL HEIGHT IN VERTICAL		mm	280	354	354	411	411	475
THRU HOLE DIAMETER		mm	―	60	60	115	115	―
WIDTH OF T-SLOT		mm	12	12	12	14	14	―
WIDTH OF GUIDE BLOCK		mm(h7)	18	18	18	18	18	―
MOTOR(FANUC※)			α2/2000	α3/3000	α6/2000	α6/2000	α12/2000	α12/2000
GEAR RATIO			1/90	1/120	1/60	1/120	1/60	1/60
MAX. R.P.M		r.p.m.	22.2	16.7	33.3	16.7	33.3	33.3
MIN. INDEXING UNIT		degree	0.001	0.001	0.001	0.001	0.001	0.001
INDEXING ACCURACY		sec	60	14	14	12	12	12
REPEATABILITY		sec	±3	±2	±2	±2	±2	±2
CLAMPING FORCE		Ｎ-m	539	284	284	2303	2303	2450
CLAMPING FORCE		kg-m	55	29	29	235	235	250
HYDRAULIC PRESSURE		ＭＰa	4.9	4.9	4.9	4.9	4.9	4.9
HYDRAULIC PRESSURE		kg/cm2	50	50	50	50	50	50
PERMISSIBLE LOAD (VERTICAL)		kg	40	100	100	150	150	350
MAX MACHINING FORCE		Ｎ-m	167	735	735	1117	1117	1274
MAX MACHINING FORCE		kg-m	17	75	75	114	114	130
WEIGHT		kg	70	115	120	205	215	380

MDU Type Specifications

Click HERE to view MDB diagrams.

ITEMS	MODEL		MDU 253R(L)	MDU 322R(L)	MDU 323R(L)	MDU 400R(L)	MDU 403R(L)	MDU 500R(L)	MDU 503R(L)	MDU 630R(L)
TABLE DIAMETER		mm	250	325	325	400	400	500	500	635
CENTER HEIGHT IN VERTICAL		mm	150	210	210	255	255	280	280	400
OVERALL HEIGHT IN VERTICAL		mm	473	611	638	735	735	780	780	1018.3
THRU HOLE DIAMETER		mm	70	115	115	170	170	170	170	260
WIDTH OF T-SLOT		mm	12	14	14	14	14	18	18	18
WIDTH OF GUIDE BLOCK		mm(h7)	18	18	18	18	18	18	18	22
MOTOR(FANUC※)			α6/2000	α6/2000	α12/2000	α12/2000	α22/2000	α12/2000	α22/2000	α22/2000
GEAR RATIO			1/60	1/120	1/60	1/180	1/60	1/180	1/60	1/360
MAX. R.P.M		r.p.m.	33.3	16.7	33.3	8.3	33.3	8.3	33.3	5.5
MIN. INDEXING UNIT		degree	0.001	0.001	0.001	0.001	0.001	0.001	0.001	0.001
INDEXING ACCURACY		sec	14(6)	12(6)	12(6)	12(6)	12(6)	12(6)	12(6)	12(6)
REPEATABILITY		sec	±2(2)	±2(2)	±2(2)	±2(2)	±2(2)	±2(2)	±2(2)	±2(2)
CLAMPING FORCE		Ｎ-m	764	2303	2303	4675	4675	4675	4675	5635
CLAMPING FORCE		kg-m	78	235	235	477	477	477	477	575
HYDRAULIC PRESSUER		ＭＰa	4.9	4.9	4.9	4.9	4.9	4.9	4.9	4.9
HYDRAULIC PRESSUER		kg/cm2	50	50	50	50	50	50	50	50
PERMISSIBLE LOAD (VERTICAL)		kg	120	150	150	350	350	350	350	800
MAX MACHINING FORCE		Ｎ-m	735	1117	1117	1470	1470	1470	1470	3136
MAX MACHINING FORCE		kg-m	75	114	114	150	150	150	150	320
WEIGHT		kg	130	225	230	350	360	390	400	1100

MDO Type Specifications

Click HERE to view MDO diagrams.

ITEMS	MODEL		MDO333R(L)	MDO403R(L)	MDO503R(L)	MDO603R(L)
TABLE DIAMETER		mm	330	400	500	600
TABLE HEIGHT IN HORIZONTAL		mm	250	270	250	310
OVERALL HEIGHT IN VERTICAL		mm	250	270	450	310
THRU HOLE DIAMETER		mm	―	―	―	―
WIDTH OF T-SLOT		mm	―	―	―	―
WIDTH OF GUIDE BLOCK		mm(h7)	―	―	―	―
MOTOR(FANUC※)			α12/2000	α12/2000	α12/2000	α22/2000
GEAR RATIO			1/60	1/60	1/60	1/60